1、Marked in red hot water imports. Blue markers are imported cold water.
2、After the set temperature, such as when there is a change in water temperature or pressure, water temperature change in ± 2 ℃.
3、If the hot and cold water pressure is inconsistent, you should install a one-way inlet valve to prevent cold water each string。
4、If the cold and hot water pressure ratio of more than eight: one should pressure limiting valve in the side of the mixing valve can be installed to ensure that the normal regulation.
5、In the selection and installation Please note nominal pressure, mixing water temperature and other requirements are consistent with that argument. This product is a patented product developed by our company, for the convenience of users of solar water heaters, while supporting the development of the non-return valve on the valve and limiting, and debugging precautions for use.
1、Debugging temperature should be put to maximum water flow.
2、Knob positive spin direction is cooling, reverse the direction of rotation is heating up, the initial adjustment please note the direction of adjustment from low to prevent burns.
3、Listen to the end of the lower temperature adjustment knob is turned off the hot water, high temperature and direction was closed at the end of the cold water, if the water temperature is not high, you can turn off the cold water bath with hot water only, but after use should be noted that the high return low temperature region, so the next time the scalding.
4、If cold, hot water pressure is inconsistent, and there is no way stop valve installed, please note that after each use, the thermostat knob transferred to the lower temperature end, namely off hot state, the greatest degree of each string to prevent the hot and cold water .