Current Position： Home >> Service >> Concealed schematic
Planning conditions
Bathroom requirements:
1.Dry zone temperature zone
Must be separated, the power control switch must be installed in the dry zone.
2.Floor shower area
Ground water shower areas must be prepared to handle, non-slip tile paved.
1.Dry zone temperature zone
Must be separated, the power control switch must be installed in the dry zone.
2.Floor shower area
Ground water shower areas must be prepared to handle, non-slip tile paved.
Require building:
1.Ceiling thickness
Raisin 304 Square Top shower, weight about 18.2 KG, will reach more than 30KG when water shower, so the thickness of the above must 15CM.
2.Ceiling height
Ceiling height must be at least 2.3 M, so as not to affect the shower and enjoy the effect, beautiful bathroom.
3.Wall thickness
The thickness of the wall in 15CM above, to ensure that concealed the leading embedded and concealed.
1.Ceiling thickness
Raisin 304 Square Top shower, weight about 18.2 KG, will reach more than 30KG when water shower, so the thickness of the above must 15CM.
2.Ceiling height
Ceiling height must be at least 2.3 M, so as not to affect the shower and enjoy the effect, beautiful bathroom.
3.Wall thickness
The thickness of the wall in 15CM above, to ensure that concealed the leading embedded and concealed.
Drainage requirements:
1.Hot water supply
Maximum operating pressure:0.8MPa;Working pressure0.25-0.45MPa;Maximum temperature:8 50C;Ideal water temperature:150C-6 50C。
2.Low water protection
The number of continuous use shower system is the ultimate deciding factor; to guarantee that a person full enjoyment of the shower system, hot water, at least a minimum amount of protection than 250L.
3.Connecting pipe leading out of the water
Two G3 / 4 "(hot and cold) into the water; five 2" mixed water inlet pipe.
Pay attention!Any component linked to all of the plumbing in shower system (faucet, shower head, shower posture, etc.) must first pass before water to remove impurities, to avoid clogging shower system components, damage.
4.Drainage system
Drainage system at the minimum displacement 60L per minute or more.
1.Hot water supply
Maximum operating pressure:0.8MPa;Working pressure0.25-0.45MPa;Maximum temperature:8 50C;Ideal water temperature:150C-6 50C。
2.Low water protection
The number of continuous use shower system is the ultimate deciding factor; to guarantee that a person full enjoyment of the shower system, hot water, at least a minimum amount of protection than 250L.
3.Connecting pipe leading out of the water
Two G3 / 4 "(hot and cold) into the water; five 2" mixed water inlet pipe.
Pay attention!Any component linked to all of the plumbing in shower system (faucet, shower head, shower posture, etc.) must first pass before water to remove impurities, to avoid clogging shower system components, damage.
4.Drainage system
Drainage system at the minimum displacement 60L per minute or more.
Kaiping OMEKN Thermostatic Sanitary Ware Co. Ltd
Adress: No.10 -16, Xianghe Road(W), Yueshan Town, Kaiping City, Guangdong Province, China.
Tel：0086－0750－2760851
Fax：0086－0750－2760852
E-mail:sales@lesunvip.cn
web：www.lesunvip.cn
Copyright © 2014 LESUN Sanitary Ware Co.,LTD. All rights reserved.